SE3-NL-WV-1200-NC  - Rototherm Polska  Sales

BRAND Rototherm
Product SE3-NL-WV-1200-NC
Description storage mass for rotary heat exchanger
Internal code IMP4615344
Technical specification Composed of: - hub with internal bearing - Spoke construction to accommodate the storage mass - storage mass Description: STE1 - hygroscopic (standard) for cost-effective recovery of sensitive and latent heat in Standard applications in the comfort climate sector. Moisture transfer when the dew point falls below of an air flow (e.g. winter) and to a reduced Degrees in the rest of the period. The structure of storage mass consists of a changing smooth and corrugated aluminum foil layer, which be wound up spirally. Thanks to the train and pressure anchor construction, the rotors achieve a very high high mechanical stability without adhesives. This Spokes are from the periphery to the center and welded to the circumference of the rotor. Rotor wound (W type). Wave height of film layers: Standard N=2.0mm, maximum operating temperature 70°C. Standard delivery vertically, horizontally after arrangement. Storage mass position adjustable in housing. Permanently lubricated bearings, protected in center of the storage mass. Carefully clean the rotor with compressed air is possible, use of steam and Water by arrangement. rotor Ø 1,200 mm wave height 2.00 mm rotor width 200 mm One piece (W) Vertical installation position (V) Speed 12.0 rpm

Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Rototherm - SE3-NL-WV-1200-NC storage mass for rotary heat exchanger number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Polska Industrial products Market.

WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

More products of Rototherm

AM180

for Type .: PT10W 1500-200V70 Drive Type: 1L220CF071 / 0,2KW / 230V Kom .: 300031 Machine No .: 6694

BH345 + T/WELL

ANGLE PATTERN BIMETALLIC THERMOMETERS,DIAL DIAMETER:100mm; CASE MATERIAL: 304 STAINLESS STEEL;STEM DIAMETER:8mm,STEM LENGTH: 540 MM;TEMPERATURE RANGE:0 TO 50 DEG.C;CONNECTION:2”-150#-FF (316L)

BH345-A-8.0mm-500mm-0 to 100-C-X-1

Thermometer,bi-metal,0-100deg, 500mm long probe, analogue unit

CSTPP300-6WSMI-XOJC0C1/3/1/O36F-2S091D-2S091E

Clearscan Chart Recorder CSTPP300 - One Pen Temperature & Two Pen Pressure Recorder Supplied with 1 box of 100 charts / 3 spare packet(s) of pens

FREQUENCY INVERTER FOR MOTOR (SPEED CONTROL)

for Type .: PT10W 1500-200V70 Drive Type: 1L220CF071 / 0,2KW / 230V Kom .: 300031 Machine No .: 6694

FW4505 (blue)

Disposable Pen Cartridge for Recorder 9057

FW4505 (red)

Disposable Pen Cartridge for Recorder 9057

HEAT WHEEL

for Type .: PT10W 1500-200V70 Drive Type: 1L220CF071 / 0,2KW / 230V Kom .: 300031 Machine No .: 6694

RP010/5/C/2/1/D/0-10,000KPA

Chart no : 9/w/137/x (0-100)

RP010/5/C/2/1/D/0-6000KPA

chart no : 9/W/7178/S

RTPO200-6W0EI-NOOC5C1/10/4/I305F-2S562D

RPO/RTO Chart Recorder Type: RTPO200 - One Pen Temperature & One Pen Pressure Recorder Supplied with 1 box of 100 charts / 2 spare packet(s) of pens. Case: Steel case epoxy powder coated black, acrylic window, lockable door. IP55 Mounting: Wall / Panel Controls: Not Required Chart Drive: Electric 240V 50Hz Rotation: 24 Hour Chart: 9" (240mm) circular chart: 9/D/4397/X Inking System: Disposable fibre tipped pens Pen 1 - Temperature Specifications: Range: 0 to 150 °C Bulb: Type 303 - rigid extension with Gland Bulb Length: 380 mm Immersion Length: 305 mm Capillary Type: C1 Stainless Steel Capillary Length: 10 metres Gland: 1/2" BSP.T Male Pen 2 - Pressure Specifications: System Material: 316 Stainless Steel Pressure Range: 0 to 60 PSI Process Connection: 1/2" NPT Male

SENTINEL RECORDER CONTROLLER - SINGLE PEN (SEN10)

Pen 1 - Input RTD - PT100 Pen 1 - Ranges 0 to 100 Pen 1 - Unit of Measure Celsuis Chart Rotation: 24 Hours Power Supply 115V 50Hz Alarms: 3 Alarms Charts: Supplied with one pack of 100 9" charts as standard Chart Number: 9/D/137/X

SENTINEL RECORDER CONTROLLER - TWO PEN (SEN20)

Pen 1 Input RTD PT100, Pen 2 Input DC Current 4-20mA, Pen 1 Unit of Measure Celsuis, Pen 2 Pressure Bar Chart Number 9/D/137/X

SPG100

0-400 Psi manometer - Lower Output - Diameter 100 - Glycerine - ½ npt Male.

V-BELT

for Type .: PT10W 1500-200V70 Drive Type: 1L220CF071 / 0,2KW / 230V Kom .: 300031 Machine No .: 6694

V-BELT PULLEY

for Type .: PT10W 1500-200V70 Drive Type: 1L220CF071 / 0,2KW / 230V Kom .: 300031 Machine No .: 6694

WESG-03600

1 DigiTemp Tx Transmitter

23988/11

Pens 23988/11 (Blue) Packs of 3

Obsolete C105 replaced by RPO100

single-pen pressure recorder

Pt100

Embedded type thermal resistance

Y98228.1261

temperature indicator, cooling water inlet

61A12-B-2C

temp sensor

61A12-B-4C

thermometers

Contact us for request