BRAND | Calectro |
Product | CPS-D-A-9500 |
Internal code | IMP4938627 |
Technical specification | Calectro differential pressure transmitter -100... +9500 Pa with display The CPS-D-A-9500 pressure sensor has a built-in differential pressure element, which for a high Accuracy and linearity are temperature-compensated. The differential pressure element and the output signal have a high resolution, which means that the pressure value is in steps of max. 1 Pa over the entire Measurement range (-100 to + 9500Pa) is presented. The desired function and measurement range are determined by set an illuminated display. The pressure measurement range determines at which measurement value the Start the output signal and when the maximum output signal should be given. output signal (0- 10V or 4-20 mA), K factor for volume measurement and the desired signal attenuation are also set via the display. CPS-D-A-9500 is factory-fitted for differential pressure measurement in the range 0-500 Pa, 0-10V output signal and medium signal attenuation (10 sec.) delivered. The measurement range can be random from -100 Pa to +9500 Pa, in steps of 50 Pa. CPS-D-A-9500 can be set via the setting Measure the volume/flow rate of the K-factor using, for example, fans or measurement ports. Die The conversion formula from differential pressure to volume is: q = k x?? p. The K factor can be used with two Decimal places can be set. Various units can also be set: m³/h, m³//s and l/s. The unit setting is just a display label and therefore does not perform a mathematical calculation off the measured value. The measurement range can be indiscriminately from 0 to 32000, in steps of 100 to 3500 and in Steps of 500 from 3500 can be set. TECHNICAL DATA Supply voltage: 24V AC/DC ± 10% power consumption: 43 mA Output signal: 0-10V (>5 k? imp.) /4-20 mA Average attenuation: 3.10 or 20 sec Pressure ranges: Adjustable from -100 to +9500 Pa, in steps of 50 Pa Volume ranges: adjustable from 0 to +32000, in steps of 100 to 3500 and in steps of 500 to 3500 - Selectable standard symbols on the display: m³/h, m³//sec or l/sec - K factor: 0-9999.99 Accuracy: Normally ± 1% of measured pressure (@ <-100 Pa/>+100 Pa) Display: graphical LCD with backlight Ambient temperature: -20 to +50°C Cable inputs: 1xM16, 5-10 mm cable dimensions (WxHxD): 78 x90x40 m Weight: 92g 2 m hose and 2 nipples Protection class: IP54 |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Calectro - CPS-D-A-9500 number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Polska Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Calectro Optischer Rauchmelder-Einsatz
SMOKE DETECTOR
Calectro Optical smoke switch 16-30 V DC, including short-circuit relay for use in raumen to fruezeitigen detections of Schwellbraenden fire and fire with smoke development .The sensor operates on the principle of scattered light, alarm relay with a potential-free changeover, including mounting base, the light transmitter and receiver are arranged in the Messa chamber so that the Lichtbuendel of the transmitter do not apply directly to the receiver kann.Erst the scattered light on suspended particles (Tyndall effect) reaches the receiver and is in an electrical signal umgesetzt.Eine green LED pollution (service), a red LED indicates the alarm. relay contact loads with 24 V / 1 A. Ambient temperature: minus 20 plus 50 degrees .Leistungsaufnahme: 2.64 watts; VDS test certificate: 205041
smoke detector
Air duct smoke detector 24V DC
Optical Smoke Detector Insert
Air duct smoke detector
Calectro Luftkanalrauchschalter
Air duct smoke detector
Optical smoke detector
Duct Smoke Detector for Air Ventilation
air duct smoke switch
Air duct smoke detector
Socket for smoke detector ST-P-DA/EVC-PY-DA
PRESSURE TRANSDUCER
Fire alarm switch
air duct smoke switch 24 V AC/DC
Venturi-Rohr Länge 600 mm für UG-5
console
Transparent cover for optical smoke detector
protective housing
Steuergerät
Differential pressure transmitter -50 - +3500 Pa
smoke detector
Complete unit including the alarm inside it