TMW 32/11 - Wilo Polska Sales

BRAND	Wilo
Product	TMW 32/11
Description	Dirty water submersible motor pump
Internal code	IMP4744856
Custom code	84137021
Technical specification	Article number 4048414 Submersible motor pump for stationary and transportable Wet installation. Pump with attached float switch for fully automatic operation. For funding in domestic areas of: - waste water without faeces - dirty water (with small amounts of sand and gravel) Waste water pump with integrated vortex device (twister function), open multi-channel impeller and vertical Threaded connection. Pump housing, suction basket and impeller off Composite material. 1~ motor (jacket cooling) with integrated Operating capacitor and self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled Sealing chamber with double seal: on the engine side, there is a Shaft seal, a mechanical seal installed on the pump side. Connection cable with float switch and attached plug (CEE 7/7). Operational data Delivery medium: water 100% Media temperature: 20.00 °C Requested flow rate: Requested funding amount: Max. delivery height: 10.00 m product data Type of impeller construction: Open multi-channel impeller Free hydraulic ball passage: 10 mm Maximum operating pressure: 2 bar Max. immersion depth: 1 m Media temperature: 3... 35 °C Max. media temperature, briefly up to 3 min.: 90 °C motor data Power supply: 1~230V/50 Hz Voltage tolerance: +-10% Power factor: 0.93 Rated motor power: 0.55 kW Power consumption: 0.75 kW Nominal current: 3.6 A Switch on mode: Direct (DOL) Rated speed: 2900 1/min Max. switching frequency: 50 1/h Insulation class: F Protection class: IP68 Operating mode (submerged): S1 Operating mode (submerged): S 3-25% wires Length of connection cable: 4 m Cable type: H07RN-F Cable cross-section: 3G1 Power plug: CEE7/7 (Schuko) Type of connection cable: Not detachable Equipment/function Float switch: yes Type of explosion protection: -Motor protection: bimetal materials Pump housing: PP-GF30 Impeller: PPE/PS-GF20 Wave: 1.4104 Pump-side sealing: BQ1PFF Engine side sealing: NBR Seal material: NBR Engine Case: 1.4301 Installation dimensions Suction side pipe connection:, - Pressure-side pipe connection: G 1¼, PN 6 Order information manufacturer: Wilo Product Name: Drain TMW 32/11

Please Contact Us to Order to offer competitive prices and delivery time for Wilo - TMW 32/11 Dirty water submersible motor pump number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Polska Industrial products Market.

WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.