| BRAND | Inoxpa |
| Product | Manual CIP unit, mobile version, with 1 tank of 500l., flow rate 10.000 l/h |
| Description | CIP unit at 1 line of 10.000 l/h, composed of one tank of 500 l. |
| Internal code | IMP3333315 |
| Weight | 500 |
| Technical specification | This unit is composed by: Isolated tank of 500 l. for chemical solutions, n°1, made in stainless steel AISI 316L, isolated in the body, complete of attacks for temperature probe, connection for manual valves. Attack for the water inlet and return lines in the upper bottom. Set of manual valves for flow management, butterfly type, made of AISI 316L stainless steel, EPDM seal, complete of handle multi position. The connections are CLAMP. Centrifugal pump, mod. HYGINOX SE-28, flowrate 12.000 l/h a 4 bar, motor 4 kW. The connection are CLAMP type. Control strumentations, composts of: No. 1 electric resistance of 15Kw that will be located inside the tank for heating the cleaning solution. No. 1 temperature probe placed low solution tank. Support skid, made of AISI 304 stainless steel, with assembly of all the elements offered, with two fixed wheels and two mobile wheels. All the welds will be made by flooding the interior with inert gas to eliminate the risk of contamination. Electrical panel, composed of: Stainless Steel cabinet; Protection and control elements of motor pump; Temperature control. |
Please Contact Us to Order to offer competitive prices and delivery time for Inoxpa - Manual CIP unit, mobile version, with 1 tank of 500l., flow rate 10.000 l/h CIP unit at 1 line of 10.000 l/h, composed of one tank of 500 l. number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Polska Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
LOBE PUMP
SLR 2 SHAFT SLEEVE
SHAFT SLEEVE
Lobe Pump Kit SiC / SiC / EPDM MEKANİK salmastro
LOBE PUMP SLR 4-100 DIN M / --
SLR PUMP 1-40 DIN AISI-316 / + COAXIAL GEARMOTOR NORD SK01 B3 1.5 KW 4 POLES IE2 230/400V 50HZ / 359
gear motor
AISI-316 DIN PUMP/—
SLR2 ROTARY PART CARBIDE/EPDM .35
ROTARY PART CARBIDE/EPDM .35
SLR2 STAT.PART B15 CARBID/EPDM.35
SLR2 STAT.PART B15 CARBID/EPDM.35
LOBE PUMP
STAINLESS STEEL PUMP
PUMP
SLR3 ROT.PART B15 CARBIDE/EPDM.50
SLR3 ROT.PART B15 CARBIDE/EPDM.50
SLR3 STAT.PART B15 CARBID/EPDM.50
SLR3 STAT.PART B15 CARBID/EPDM.50
TANK BOTTOM SEAT VALVE CLAMP DN65
INOXPA TANK BOTTOM SEAT VALVE CLAMP
TANK BOTTOM SEAT VALVE CLAMP DN80
INOXPA TANK BOTTOM SEAT VALVE CLAMP
LOBE PUMP
LOBE PUMP GEAR MOTOR SK20/90 1.5 kW / 370 rpm + SUPL.SHR0UD FOR TLS 2-40/2-50 /
TYPE KH PNUEMATIC ACTUATOR VALVE - THREE-WAY
Stainless steel AISI316L Dimentions 2 1/2"(DN65) Working temperature(EPDM): From -10 degree to +120 degree Maximum working pressure 10BAR, Air connection:G 1/8" Air pressure : 6-8bar height :522mm width :160mm
Modular vertical agitator
ME. SEAL
Butterfly valve DN50 "without hand lever," Connections: Ø Di = 50mm welding / welding Material: AISI 304L / EPDM (FDA)
Lever "with screening"
double-acting pneumatic actuator for butterfly valve Inoxpa 48‐‐ DN10‐100 AISI 304
