BRAND | Fischer |
Product | 20820200 |
Description | Industrial control valve with driver |
Internal code | IMP4491371 |
Technical specification | Type 1124: Industrial control valve with electric drive Closing pressure: 1250 kPa BR 225 Globe Valve Type 1242A: Straight way valve BR225 Housing: Ductile iron | GGG-40.3 | EN-JS1024 Connection method: flanges according to EN 1092-2 type 21 form B1 Installation length: EN 558-1 basic series 1 Nominal size: DN 32 Nominal pressure: PN 16 - 40 flow direction: counter to the closing direction Leak rate: EN 1349 - seat leakage IV L 1 (= 0.01% of the kvs value) Cone: parabolic cone made of stainless steel 1.4057 Seat: press fit made of 1.4021 Seat diameter: 32 mm Spindle sealing: O-rings made of EPDM Protective paint: L200 | 1K zinc dust primer, grey Medium: water-glycol max. temperature TS: 0... +180 °C Tech. Delivery condition: EN 1349/PED 2014/68/EU cat. I with CE mark 0045 Drive input: M10 thread for HORA MCxx3/PA-N160 /PA-N300 Type plate: with HORA logo Electric lifting actuator MC 163 Type 1922B: MC163 electric lift actuator Voltage: 230 V AC Frequency: 50-60 Hz Actuating force: 1.6 kN Operating time: 4 s/mm Input signal: 0... 10 V DC Output signal: 0... 10 V DC Electr. Connection: terminal block Drive stroke: <= 30 mm Intake: For HORA valves DN15 - DN65 | M10 | stroke 20 mm - 30 mm BR 225, BR240 S, BR240, EBR325, BR 340 S, BR340. Type plate: with HORA logo |
Please Contact Us to Order to offer competitive prices and delivery time for Fischer - 20820200 Industrial control valve with driver number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Polska Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
interface connection set MP
CERTIFICATE Anotest REFERENCE
type M
measuring cell
Release electrolyte
adaptors
probe
Couloscope
Forcing özllk's technical information
switch
Charger
batteries
ART.NO. 602-221 EGAB1.3-FE (ORDER NO. 901-735)
sensor probe
LB capsule, 1 gr capsules,
[605-086 Couloscope]
Pressure sensor
Connector
. (Measuring forms for pressure, vacuum and differential pressure measurement range 0-1 bar, diaphragm / seal Viton pressure chamber aluminum / hardcoated El output signal 4-20 mA, 2-wire operating voltage 24 V DC + - 10% without the measured value display, El excursion continues cable connector, suitable limited IP65, Augangssignal to 20 mA, tolerance range for the current limitation (Imax> 19.6 <20mA)) for attachment to Blendenflansh, protection
Transmitter for pressure, negative pressure
FLOW MONITORprod. number: 1204372.01.001
oil flow meter
oil flow meter Range: 0-280 LPM
Pressure sensor 24vdc / ac 20-4 250mbar
Pressure sensor 24v DC / AC 50..0mbar 250mbar
transmitter